Sensi-Touch® (S) (SL) Balancer Controls

THE LOAD HOOK IS DIRECTLY UNDER THE CONTROL HANDLE

• Sensi-Touch ® Controls have a range of FLOAT (or balance) of 4 to 6 inches. This allows the operator to move load within a couple of inches of drop off point, remove hands from the control so that the part can be maneuvered in place and then release.
  
• SPEED: These controls allow for variable speeds. Gentle pressure causes a slow gradual movement.
  Increased pressure causes faster movement. Smooth travel movement is consistent throughout travel.
  
• SPEED ADJUSTMENTS are easily handled with no additional tools required. All up speed is adjusted by turning the flow control on the manifold (located on the Bal-Trol ®). Down speed is adjusted at the control handle.
  
• SAFETY: Loss of air pressure will not result in load dropping. Bal-Trol ® will keep load in place. Once the load is in place, it may be removed from the hook.
  
• OPERATION: A thumb ring at the top of the Controls provides better control on the upstroke. For the downstroke
  simply pull down on the control.