Sensi-Touch® (S) (SL) Balancer Controls

The load hook is directly under the control handle

THIS LIFT ASSIST IS USED FOR PICK AND PLACE APPLICATIONS. ENABLES OBJECTS TO BE LOADED AND UNLOADED. THE RANGE OF “FLOAT” ALLOWS FOR PRECISE PLACEMENT WITHOUT DAMAGING PRODUCT OR MACHINE.

  • Sensi-Touch Balancer Controls have a range of FLOAT (or balance) of 4 to 6 inches. This allows the operator to move load within a couple of inches of drop off point, remove hands from the control so that the part can be maneuvered in place and then release.
  • SPEED: These controls allow for variable speeds. Gentle pressure causes a slow gradual movement. Increased pressure causes faster movement. Smooth travel movement is consistent throughout travel.
  • SPEED ADJUSTMENTS are easily handled with no additional tools required. All up speed is adjusted by turning the flow control on the manifold (located on the Bal-Trol ®). Down speed is adjusted at the control handle.
  • SAFETY: Loss of air pressure will not result in load dropping. Bal-Trol ® will keep load in place. Once the load is in place, it may be removed from the hook after releasing the air pressure in the unit.
  • OPERATION: A thumb ring at the top of the Controls provides better control on the upstroke. For the downstroke simply pull down on the control.

  • 901-06001 - Large Sensi-Touch ® Control ONLY

Model S Original Sensi-Touch®

  • Larger grip diameter.
  • Down speed adjustment conveniently located on the control.
  • Compatible with all models of Bal-Trol®.







    901-06000 - (5-375 Lbs.) Small Sensi-Touch Control ONLY.
    901-06001 - (400-1200) Large Sensi-Touch Control ONLY.

  • Model SL Slim-Line Sensi-Touch

Model SL Slim-Line
Sensi-Touch®

  • Small, fits comfortably in most any size hand.
  • Same load bearing capacity and air flow speed as the Original Sensi-Touch.
  • Up & down speed adjustments located near the Bal-Trol.
  • Compatible with all sizes of Bal-Trol.
  • Operates at 45 PSI minimum.
  • Dual-acting option provides a power-assisted down mode, which makes it easier to lower an empty hook when there is no load present. Recommended for heavy loads 300 lbs. or more, but can be used on any weight.

    905-06000 - (5-375 Lbs.) Small Slim- Line Sensi-Touch CONTROL ONLY.
    905-06002 - (400-1200 Lbs.) Large Slim-Line Sensi-Touch CONTROL ONLY.