Products: Drop Stop® Load Arrestors From Tri-Motion |
|
|||
|
Tri-Motion Drop Stop Load Arrestors work on the principle of inertia. Inertia is the same principle used in car seat belt systems. Drop-Stops® are used as a back-up device to the Bal-Trol® pneumatic balancing hoist or in any other situation where a suspended load, tool, fixture or other heavy object could potentially fall and injure workers or damage valuable equipment or machinery. The load arrestor's spring tensioned cable is connected to the load. The device senses a fall when the connected object's downward movement speed exceeds the lock-on inertia rate and the Drop Stop® arrests the fall. ADDITIONAL FEATURES OF DROP-STOPS®:
We Strongly Recommend The Use Of Drop-Stop® On All Overhead Load Applications. Capacities From 300 pounds To 3,300 pounds. Other Models Available. Please contact Tri-Motion for applications assistance for your Drop Stop® requirements. |
|||
![]() Model D20-300 |
![]() Model D23-3000 |
![]()
Model D17-1100 |
|


For technical, applications or parts assistance, please contact Tri-Motion Industries.


